Implementation Guide for ARF/RHD Register - AU
0.2.0 - ci-build Australia flag

Implementation Guide for ARF/RHD Register - AU - Local Development build (v0.2.0) built by the FHIR (HL7® FHIR® Standard) Build Tools. See the Directory of published versions

Resource Profile: ARFCondition - Detailed Descriptions

Draft as of 2024-10-28

Definitions for the ARFCondition resource profile.

Guidance on how to interpret the contents of this table can be found here

0. Condition
2. Condition.identifier
NoteThis is a business identifier, not a resource identifier (see discussion)
Control1..?
Must Supporttrue
4. Condition.severity
BindingThe codes SHALL be taken from Acute Rheumatic Fever Condition Severity
(required to http://fhir-arf-register.nardhc.org/ValueSet/arf-severity-vs)
6. Condition.code
BindingThe codes SHALL be taken from Acute Rheumatic Fever and Rheumatic Heart Disease Conditions
(required to http://fhir-arf-register.nardhc.org/ValueSet/arf-diagnosis-vs)
8. Condition.subject
TypeReference(ARFPatient)

Guidance on how to interpret the contents of this table can be found here

0. Condition
Definition

A clinical condition, problem, diagnosis, or other event, situation, issue, or clinical concept that has risen to a level of concern.

ShortA condition, problem or diagnosis statement in an Australian healthcare contextDetailed information about conditions, problems or diagnoses
Control0..*
Is Modifierfalse
Summaryfalse
Invariantscon-3: Condition.clinicalStatus SHALL be present if verificationStatus is not entered-in-error and category is problem-list-item (clinicalStatus.exists() or verificationStatus.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-ver-status' and code = 'entered-in-error').exists() or category.select($this='problem-list-item').empty())
con-4: If condition is abated, then clinicalStatus must be either inactive, resolved, or remission (abatement.empty() or clinicalStatus.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-clinical' and (code='resolved' or code='remission' or code='inactive')).exists())
con-5: Condition.clinicalStatus SHALL NOT be present if verification Status is entered-in-error (verificationStatus.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-ver-status' and code='entered-in-error').empty() or clinicalStatus.empty())
dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
con-3: Condition.clinicalStatus SHALL be present if verificationStatus is not entered-in-error and category is problem-list-item (clinicalStatus.exists() or verificationStatus.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-ver-status' and code = 'entered-in-error').exists() or category.select($this='problem-list-item').empty())
con-4: If condition is abated, then clinicalStatus must be either inactive, resolved, or remission (abatement.empty() or clinicalStatus.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-clinical' and (code='resolved' or code='remission' or code='inactive')).exists())
con-5: Condition.clinicalStatus SHALL NOT be present if verification Status is entered-in-error (verificationStatus.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-ver-status' and code='entered-in-error').empty() or clinicalStatus.empty())
2. Condition.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. Condition.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Summaryfalse
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
6. Condition.identifier
Definition

Business identifiers assigned to this condition by the performer or other systems which remain constant as the resource is updated and propagates from server to server.

ShortExternal Ids for this condition
Comments

This is a business identifier, not a resource identifier (see discussion). It is best practice for the identifier to only appear on a single resource instance, however business practices may occasionally dictate that multiple resource instances with the same identifier can exist - possibly even with different resource types. For example, multiple Patient and a Person resource instance might share the same social insurance number.

NoteThis is a business identifier, not a resource identifier (see discussion)
Control10..*
TypeIdentifier
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Allows identification of the condition as it is known by various participating systems and in a way that remains consistent across servers.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
8. Condition.clinicalStatus
Definition

The clinical status of the condition.

Shortactive | recurrence | relapse | inactive | remission | resolved
Comments

The data type is CodeableConcept because clinicalStatus has some clinical judgment involved, such that there might need to be more specificity than the required FHIR value set allows. For example, a SNOMED coding might allow for additional specificity.

Control0..1
This element is affected by the following invariants: con-3, con-4, con-5
BindingThe codes SHALL be taken from ConditionClinicalStatusCodeshttp://hl7.org/fhir/ValueSet/condition-clinical|4.0.1
(required to http://hl7.org/fhir/ValueSet/condition-clinical|4.0.1)

The clinical status of the condition or diagnosis.

TypeCodeableConcept
Is Modifiertrue because This element is labeled as a modifier because the status contains codes that mark the condition as no longer active.
Must Supporttrue
Obligations
    ObligationsActor
    SHALL:populate-if-knownhttp://hl7.org.au/fhir/core/ActorDefinition/au-core-actor-responder
    SHALL:no-errorhttp://hl7.org.au/fhir/core/ActorDefinition/au-core-actor-requester
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    10. Condition.verificationStatus
    Definition

    The verification status to support the clinical status of the condition.

    Shortunconfirmed | provisional | differential | confirmed | refuted | entered-in-error
    Comments

    verificationStatus is not required. For example, when a patient has abdominal pain in the ED, there is not likely going to be a verification status. The data type is CodeableConcept because verificationStatus has some clinical judgment involved, such that there might need to be more specificity than the required FHIR value set allows. For example, a SNOMED coding might allow for additional specificity.

    Control0..1
    This element is affected by the following invariants: con-3, con-5
    BindingThe codes SHALL be taken from ConditionVerificationStatushttp://hl7.org/fhir/ValueSet/condition-ver-status|4.0.1
    (required to http://hl7.org/fhir/ValueSet/condition-ver-status|4.0.1)

    The verification status to support or decline the clinical status of the condition or diagnosis.

    TypeCodeableConcept
    Is Modifiertrue because This element is labeled as a modifier because the status contains the code refuted and entered-in-error that mark the Condition as not currently valid.
    Must Supporttrue
    Obligations
      ObligationsActor
      SHALL:populate-if-knownhttp://hl7.org.au/fhir/core/ActorDefinition/au-core-actor-responder
      SHALL:no-errorhttp://hl7.org.au/fhir/core/ActorDefinition/au-core-actor-requester
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      12. Condition.category
      Definition

      A category assigned to the condition.

      Shortproblem-list-item | encounter-diagnosis
      Comments

      The categorization is often highly contextual and may appear poorly differentiated or not very useful in other contexts.

      Control10..*
      BindingUnless not suitable, these codes SHALL be taken from ConditionCategoryCodeshttp://hl7.org/fhir/ValueSet/condition-category
      (extensible to http://hl7.org/fhir/ValueSet/condition-category)

      A category assigned to the condition.

      TypeCodeableConcept
      Is Modifierfalse
      Must Supporttrue
      Obligations
        ObligationsActor
        SHALL:populate-if-knownhttp://hl7.org.au/fhir/core/ActorDefinition/au-core-actor-responder
        SHALL:no-errorhttp://hl7.org.au/fhir/core/ActorDefinition/au-core-actor-requester
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        14. Condition.severity
        Definition

        A subjective assessment of the severity of the condition as evaluated by the clinician.

        ShortSubjective severity of condition
        Comments

        Coding of the severity with a terminology is preferred, where possible.

        Control0..1
        BindingThe codes SHALL be taken from The codes SHOULD be taken from Acute Rheumatic Fever Condition Severityhttp://hl7.org/fhir/ValueSet/condition-severity
        (required to http://fhir-arf-register.nardhc.org/ValueSet/arf-severity-vs)
        TypeCodeableConcept
        Is Modifierfalse
        Must Supporttrue
        Obligations
          ObligationsActor
          SHALL:populate-if-knownhttp://hl7.org.au/fhir/core/ActorDefinition/au-core-actor-responder
          SHALL:no-errorhttp://hl7.org.au/fhir/core/ActorDefinition/au-core-actor-requester
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          16. Condition.code
          Definition

          Identification of the condition, problem or diagnosis.

          ShortIdentification of the condition, problem or diagnosis
          Control10..1
          BindingThe codes SHALL be taken from For example codes, see Acute Rheumatic Fever and Rheumatic Heart Disease Conditionshttp://hl7.org/fhir/ValueSet/condition-code
          (required to http://fhir-arf-register.nardhc.org/ValueSet/arf-diagnosis-vs)
          TypeCodeableConcept
          Is Modifierfalse
          Must Supporttrue
          Obligations
            ObligationsActor
            SHALL:populate-if-knownhttp://hl7.org.au/fhir/core/ActorDefinition/au-core-actor-responder
            SHALL:no-errorhttp://hl7.org.au/fhir/core/ActorDefinition/au-core-actor-requester
            Summarytrue
            Requirements

            0..1 to account for primarily narrative only resources.

            Alternate Namestype
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            18. Condition.subject
            Definition

            Indicates the patient or group who the condition record is associated with.

            ShortWho has the condition?
            Control1..1
            TypeReference(ARFPatient, Patient, Group)
            Is Modifierfalse
            Must Supporttrue
            Obligations
              ObligationsActor
              SHALL:populate-if-knownhttp://hl7.org.au/fhir/core/ActorDefinition/au-core-actor-responder
              SHALL:no-errorhttp://hl7.org.au/fhir/core/ActorDefinition/au-core-actor-requester
              Summarytrue
              Requirements

              Group is typically used for veterinary or public health use cases.

              Alternate Namespatient
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              20. Condition.onset[x]
              Definition

              Estimated or actual date or date-time the condition began, in the opinion of the clinician.

              ShortEstimated or actual date, date-time, or age
              Comments

              Age is generally used when the patient reports an age at which the Condition began to occur.

              Control0..1
              TypeChoice of: dateTime, Age, Period, Range, string
              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              Must Support TypesNo must-support rules about the choice of types/profiles
              Obligations
                ObligationsActor
                SHALL:populate-if-knownhttp://hl7.org.au/fhir/core/ActorDefinition/au-core-actor-responder
                SHALL:no-errorhttp://hl7.org.au/fhir/core/ActorDefinition/au-core-actor-requester
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                22. Condition.abatement[x]
                Definition

                The date or estimated date that the condition resolved or went into remission. This is called "abatement" because of the many overloaded connotations associated with "remission" or "resolution" - Conditions are never really resolved, but they can abate.

                ShortWhen in resolution/remission
                Comments

                There is no explicit distinction between resolution and remission because in many cases the distinction is not clear. Age is generally used when the patient reports an age at which the Condition abated. If there is no abatement element, it is unknown whether the condition has resolved or entered remission; applications and users should generally assume that the condition is still valid. When abatementString exists, it implies the condition is abated.

                Control0..1
                This element is affected by the following invariants: con-4
                TypeChoice of: dateTime, Age, Period, Range, string
                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Must Supporttrue
                Must Support TypesNo must-support rules about the choice of types/profiles
                Obligations
                  ObligationsActor
                  SHALL:populate-if-knownhttp://hl7.org.au/fhir/core/ActorDefinition/au-core-actor-responder
                  SHALL:no-errorhttp://hl7.org.au/fhir/core/ActorDefinition/au-core-actor-requester
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  24. Condition.note
                  Definition

                  Additional information about the Condition. This is a general notes/comments entry for description of the Condition, its diagnosis and prognosis.

                  ShortAdditional information about the Condition
                  Control0..*
                  TypeAnnotation
                  Is Modifierfalse
                  Must Supporttrue
                  Obligations
                    ObligationsActor
                    SHALL:populate-if-knownhttp://hl7.org.au/fhir/core/ActorDefinition/au-core-actor-responder
                    SHALL:no-errorhttp://hl7.org.au/fhir/core/ActorDefinition/au-core-actor-requester
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

                    Guidance on how to interpret the contents of this table can be found here

                    0. Condition
                    Definition

                    A clinical condition, problem, diagnosis, or other event, situation, issue, or clinical concept that has risen to a level of concern.

                    ShortA condition, problem or diagnosis statement in an Australian healthcare context
                    Control0..*
                    Is Modifierfalse
                    Summaryfalse
                    Invariantscon-3: Condition.clinicalStatus SHALL be present if verificationStatus is not entered-in-error and category is problem-list-item (clinicalStatus.exists() or verificationStatus.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-ver-status' and code = 'entered-in-error').exists() or category.select($this='problem-list-item').empty())
                    con-4: If condition is abated, then clinicalStatus must be either inactive, resolved, or remission (abatement.empty() or clinicalStatus.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-clinical' and (code='resolved' or code='remission' or code='inactive')).exists())
                    con-5: Condition.clinicalStatus SHALL NOT be present if verification Status is entered-in-error (verificationStatus.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-ver-status' and code='entered-in-error').empty() or clinicalStatus.empty())
                    dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
                    dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
                    dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
                    dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
                    dom-6: A resource should have narrative for robust management (text.`div`.exists())
                    2. Condition.id
                    Definition

                    The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

                    ShortLogical id of this artifact
                    Comments

                    The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

                    Control0..1
                    Typeid
                    Is Modifierfalse
                    Summarytrue
                    4. Condition.meta
                    Definition

                    The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

                    ShortMetadata about the resource
                    Control0..1
                    TypeMeta
                    Is Modifierfalse
                    Summarytrue
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    6. Condition.implicitRules
                    Definition

                    A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

                    ShortA set of rules under which this content was created
                    Comments

                    Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

                    Control0..1
                    Typeuri
                    Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Summarytrue
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    8. Condition.language
                    Definition

                    The base language in which the resource is written.

                    ShortLanguage of the resource content
                    Comments

                    Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

                    Control0..1
                    BindingThe codes SHOULD be taken from CommonLanguages
                    (preferred to http://hl7.org/fhir/ValueSet/languages)

                    A human language.

                    Additional BindingsPurpose
                    AllLanguagesMax Binding
                    Typecode
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    10. Condition.text
                    Definition

                    A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

                    ShortText summary of the resource, for human interpretation
                    Comments

                    Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

                    Control0..1
                    TypeNarrative
                    Is Modifierfalse
                    Summaryfalse
                    Alternate Namesnarrative, html, xhtml, display
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    12. Condition.contained
                    Definition

                    These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

                    ShortContained, inline Resources
                    Comments

                    This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

                    Control0..*
                    TypeResource
                    Is Modifierfalse
                    Summaryfalse
                    Alternate Namesinline resources, anonymous resources, contained resources
                    14. Condition.extension
                    Definition

                    May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                    ShortAdditional content defined by implementations
                    Comments

                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                    Control0..*
                    TypeExtension
                    Is Modifierfalse
                    Summaryfalse
                    Alternate Namesextensions, user content
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    16. Condition.modifierExtension
                    Definition

                    May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                    ShortExtensions that cannot be ignored
                    Comments

                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                    Control0..*
                    TypeExtension
                    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
                    Summaryfalse
                    Requirements

                    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                    Alternate Namesextensions, user content
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    18. Condition.identifier
                    Definition

                    Business identifiers assigned to this condition by the performer or other systems which remain constant as the resource is updated and propagates from server to server.

                    ShortExternal Ids for this condition
                    Comments

                    This is a business identifier, not a resource identifier (see discussion). It is best practice for the identifier to only appear on a single resource instance, however business practices may occasionally dictate that multiple resource instances with the same identifier can exist - possibly even with different resource types. For example, multiple Patient and a Person resource instance might share the same social insurance number.

                    NoteThis is a business identifier, not a resource identifier (see discussion)
                    Control1..*
                    TypeIdentifier
                    Is Modifierfalse
                    Must Supporttrue
                    Summarytrue
                    Requirements

                    Allows identification of the condition as it is known by various participating systems and in a way that remains consistent across servers.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    20. Condition.clinicalStatus
                    Definition

                    The clinical status of the condition.

                    Shortactive | recurrence | relapse | inactive | remission | resolved
                    Comments

                    The data type is CodeableConcept because clinicalStatus has some clinical judgment involved, such that there might need to be more specificity than the required FHIR value set allows. For example, a SNOMED coding might allow for additional specificity.

                    Control0..1
                    This element is affected by the following invariants: con-3, con-4, con-5
                    BindingThe codes SHALL be taken from ConditionClinicalStatusCodes
                    (required to http://hl7.org/fhir/ValueSet/condition-clinical|4.0.1)

                    The clinical status of the condition or diagnosis.

                    TypeCodeableConcept
                    Is Modifiertrue because This element is labeled as a modifier because the status contains codes that mark the condition as no longer active.
                    Must Supporttrue
                    Obligations
                      ObligationsActor
                      SHALL:populate-if-knownhttp://hl7.org.au/fhir/core/ActorDefinition/au-core-actor-responder
                      SHALL:no-errorhttp://hl7.org.au/fhir/core/ActorDefinition/au-core-actor-requester
                      Summarytrue
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      22. Condition.verificationStatus
                      Definition

                      The verification status to support the clinical status of the condition.

                      Shortunconfirmed | provisional | differential | confirmed | refuted | entered-in-error
                      Comments

                      verificationStatus is not required. For example, when a patient has abdominal pain in the ED, there is not likely going to be a verification status. The data type is CodeableConcept because verificationStatus has some clinical judgment involved, such that there might need to be more specificity than the required FHIR value set allows. For example, a SNOMED coding might allow for additional specificity.

                      Control0..1
                      This element is affected by the following invariants: con-3, con-5
                      BindingThe codes SHALL be taken from ConditionVerificationStatus
                      (required to http://hl7.org/fhir/ValueSet/condition-ver-status|4.0.1)

                      The verification status to support or decline the clinical status of the condition or diagnosis.

                      TypeCodeableConcept
                      Is Modifiertrue because This element is labeled as a modifier because the status contains the code refuted and entered-in-error that mark the Condition as not currently valid.
                      Must Supporttrue
                      Obligations
                        ObligationsActor
                        SHALL:populate-if-knownhttp://hl7.org.au/fhir/core/ActorDefinition/au-core-actor-responder
                        SHALL:no-errorhttp://hl7.org.au/fhir/core/ActorDefinition/au-core-actor-requester
                        Summarytrue
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        24. Condition.category
                        Definition

                        A category assigned to the condition.

                        Shortproblem-list-item | encounter-diagnosis
                        Comments

                        The categorization is often highly contextual and may appear poorly differentiated or not very useful in other contexts.

                        Control1..*
                        BindingUnless not suitable, these codes SHALL be taken from ConditionCategoryCodes
                        (extensible to http://hl7.org/fhir/ValueSet/condition-category)

                        A category assigned to the condition.

                        TypeCodeableConcept
                        Is Modifierfalse
                        Must Supporttrue
                        Obligations
                          ObligationsActor
                          SHALL:populate-if-knownhttp://hl7.org.au/fhir/core/ActorDefinition/au-core-actor-responder
                          SHALL:no-errorhttp://hl7.org.au/fhir/core/ActorDefinition/au-core-actor-requester
                          Summaryfalse
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          26. Condition.severity
                          Definition

                          A subjective assessment of the severity of the condition as evaluated by the clinician.

                          ShortSubjective severity of condition
                          Comments

                          Coding of the severity with a terminology is preferred, where possible.

                          Control0..1
                          BindingThe codes SHALL be taken from Acute Rheumatic Fever Condition Severity
                          (required to http://fhir-arf-register.nardhc.org/ValueSet/arf-severity-vs)
                          TypeCodeableConcept
                          Is Modifierfalse
                          Must Supporttrue
                          Obligations
                            ObligationsActor
                            SHALL:populate-if-knownhttp://hl7.org.au/fhir/core/ActorDefinition/au-core-actor-responder
                            SHALL:no-errorhttp://hl7.org.au/fhir/core/ActorDefinition/au-core-actor-requester
                            Summaryfalse
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            28. Condition.code
                            Definition

                            Identification of the condition, problem or diagnosis.

                            ShortIdentification of the condition, problem or diagnosis
                            Control1..1
                            BindingThe codes SHALL be taken from Acute Rheumatic Fever and Rheumatic Heart Disease Conditions
                            (required to http://fhir-arf-register.nardhc.org/ValueSet/arf-diagnosis-vs)
                            TypeCodeableConcept
                            Is Modifierfalse
                            Must Supporttrue
                            Obligations
                              ObligationsActor
                              SHALL:populate-if-knownhttp://hl7.org.au/fhir/core/ActorDefinition/au-core-actor-responder
                              SHALL:no-errorhttp://hl7.org.au/fhir/core/ActorDefinition/au-core-actor-requester
                              Summarytrue
                              Requirements

                              0..1 to account for primarily narrative only resources.

                              Alternate Namestype
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              30. Condition.bodySite
                              Definition

                              The anatomical location where this condition manifests itself.

                              ShortAnatomical location, if relevant
                              Comments

                              Only used if not implicit in code found in Condition.code. If the use case requires attributes from the BodySite resource (e.g. to identify and track separately) then use the standard extension bodySite. May be a summary code, or a reference to a very precise definition of the location, or both.

                              Control0..*
                              This element is affected by the following invariants: au-core-cond-02
                              BindingUnless not suitable, these codes SHALL be taken from Body Site .
                              (extensible to https://healthterminologies.gov.au/fhir/ValueSet/body-site-1)
                              TypeCodeableConcept
                              Is Modifierfalse
                              Summarytrue
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              au-core-cond-02: If a coded body site is provided, at least one code shall be from SNOMED CT (coding.exists() implies coding.where(system='http://snomed.info/sct').exists())
                              32. Condition.subject
                              Definition

                              Indicates the patient or group who the condition record is associated with.

                              ShortWho has the condition?
                              Control1..1
                              TypeReference(ARFPatient)
                              Is Modifierfalse
                              Must Supporttrue
                              Obligations
                                ObligationsActor
                                SHALL:populate-if-knownhttp://hl7.org.au/fhir/core/ActorDefinition/au-core-actor-responder
                                SHALL:no-errorhttp://hl7.org.au/fhir/core/ActorDefinition/au-core-actor-requester
                                Summarytrue
                                Requirements

                                Group is typically used for veterinary or public health use cases.

                                Alternate Namespatient
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                34. Condition.encounter
                                Definition

                                The Encounter during which this Condition was created or to which the creation of this record is tightly associated.

                                ShortEncounter created as part of
                                Comments

                                This will typically be the encounter the event occurred within, but some activities may be initiated prior to or after the official completion of an encounter but still be tied to the context of the encounter. This record indicates the encounter this particular record is associated with. In the case of a "new" diagnosis reflecting ongoing/revised information about the condition, this might be distinct from the first encounter in which the underlying condition was first "known".

                                Control0..1
                                TypeReference(Encounter)
                                Is Modifierfalse
                                Summarytrue
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                36. Condition.onset[x]
                                Definition

                                Estimated or actual date or date-time the condition began, in the opinion of the clinician.

                                ShortEstimated or actual date, date-time, or age
                                Comments

                                Age is generally used when the patient reports an age at which the Condition began to occur.

                                Control0..1
                                TypeChoice of: dateTime, Age, Period, Range
                                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                Is Modifierfalse
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Must Supporttrue
                                Must Support TypesNo must-support rules about the choice of types/profiles
                                Obligations
                                  ObligationsActor
                                  SHALL:populate-if-knownhttp://hl7.org.au/fhir/core/ActorDefinition/au-core-actor-responder
                                  SHALL:no-errorhttp://hl7.org.au/fhir/core/ActorDefinition/au-core-actor-requester
                                  Summarytrue
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  38. Condition.abatement[x]
                                  Definition

                                  The date or estimated date that the condition resolved or went into remission. This is called "abatement" because of the many overloaded connotations associated with "remission" or "resolution" - Conditions are never really resolved, but they can abate.

                                  ShortWhen in resolution/remission
                                  Comments

                                  There is no explicit distinction between resolution and remission because in many cases the distinction is not clear. Age is generally used when the patient reports an age at which the Condition abated. If there is no abatement element, it is unknown whether the condition has resolved or entered remission; applications and users should generally assume that the condition is still valid. When abatementString exists, it implies the condition is abated.

                                  Control0..1
                                  This element is affected by the following invariants: con-4
                                  TypeChoice of: dateTime, Age, Period, Range
                                  [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                  Is Modifierfalse
                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                  Must Supporttrue
                                  Must Support TypesNo must-support rules about the choice of types/profiles
                                  Obligations
                                    ObligationsActor
                                    SHALL:populate-if-knownhttp://hl7.org.au/fhir/core/ActorDefinition/au-core-actor-responder
                                    SHALL:no-errorhttp://hl7.org.au/fhir/core/ActorDefinition/au-core-actor-requester
                                    Summaryfalse
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    40. Condition.recordedDate
                                    Definition

                                    The recordedDate represents when this particular Condition record was created in the system, which is often a system-generated date.

                                    ShortDate record was first recorded
                                    Control0..1
                                    TypedateTime
                                    Is Modifierfalse
                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                    Summarytrue
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    42. Condition.recorder
                                    Definition

                                    Individual who recorded the record and takes responsibility for its content.

                                    ShortWho recorded the condition
                                    Control0..1
                                    TypeReference(Practitioner, PractitionerRole, Patient, RelatedPerson)
                                    Is Modifierfalse
                                    Summarytrue
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    44. Condition.asserter
                                    Definition

                                    Individual who is making the condition statement.

                                    ShortPerson who asserts this condition
                                    Control0..1
                                    TypeReference(Practitioner, PractitionerRole, Patient, RelatedPerson)
                                    Is Modifierfalse
                                    Summarytrue
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    46. Condition.stage
                                    Definition

                                    Clinical stage or grade of a condition. May include formal severity assessments.

                                    ShortStage/grade, usually assessed formally
                                    Control0..*
                                    TypeBackboneElement
                                    Is Modifierfalse
                                    Summaryfalse
                                    Invariantscon-1: Stage SHALL have summary or assessment (summary.exists() or assessment.exists())
                                    ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    48. Condition.stage.id
                                    Definition

                                    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                    ShortUnique id for inter-element referencing
                                    Control0..1
                                    Typestring
                                    Is Modifierfalse
                                    XML FormatIn the XML format, this property is represented as an attribute.
                                    Summaryfalse
                                    50. Condition.stage.extension
                                    Definition

                                    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                    ShortAdditional content defined by implementations
                                    Comments

                                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                    Control0..*
                                    TypeExtension
                                    Is Modifierfalse
                                    Summaryfalse
                                    Alternate Namesextensions, user content
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                    52. Condition.stage.modifierExtension
                                    Definition

                                    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                    ShortExtensions that cannot be ignored even if unrecognized
                                    Comments

                                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                    Control0..*
                                    TypeExtension
                                    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                    Summarytrue
                                    Requirements

                                    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                    Alternate Namesextensions, user content, modifiers
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                    54. Condition.stage.summary
                                    Definition

                                    A simple summary of the stage such as "Stage 3". The determination of the stage is disease-specific.

                                    ShortSimple summary (disease specific)
                                    Control0..1
                                    This element is affected by the following invariants: con-1
                                    BindingFor example codes, see ConditionStage
                                    (example to http://hl7.org/fhir/ValueSet/condition-stage)

                                    Codes describing condition stages (e.g. Cancer stages).

                                    TypeCodeableConcept
                                    Is Modifierfalse
                                    Summaryfalse
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    56. Condition.stage.assessment
                                    Definition

                                    Reference to a formal record of the evidence on which the staging assessment is based.

                                    ShortFormal record of assessment
                                    Control0..*
                                    This element is affected by the following invariants: con-1
                                    TypeReference(ClinicalImpression, DiagnosticReport, Observation)
                                    Is Modifierfalse
                                    Summaryfalse
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    58. Condition.stage.type
                                    Definition

                                    The kind of staging, such as pathological or clinical staging.

                                    ShortKind of staging
                                    Control0..1
                                    BindingFor example codes, see ConditionStageType
                                    (example to http://hl7.org/fhir/ValueSet/condition-stage-type)

                                    Codes describing the kind of condition staging (e.g. clinical or pathological).

                                    TypeCodeableConcept
                                    Is Modifierfalse
                                    Summaryfalse
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    60. Condition.evidence
                                    Definition

                                    Supporting evidence / manifestations that are the basis of the Condition's verification status, such as evidence that confirmed or refuted the condition.

                                    ShortSupporting evidence
                                    Comments

                                    The evidence may be a simple list of coded symptoms/manifestations, or references to observations or formal assessments, or both.

                                    Control0..*
                                    TypeBackboneElement
                                    Is Modifierfalse
                                    Summaryfalse
                                    Invariantscon-2: evidence SHALL have code or details (code.exists() or detail.exists())
                                    ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    62. Condition.evidence.id
                                    Definition

                                    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                    ShortUnique id for inter-element referencing
                                    Control0..1
                                    Typestring
                                    Is Modifierfalse
                                    XML FormatIn the XML format, this property is represented as an attribute.
                                    Summaryfalse
                                    64. Condition.evidence.extension
                                    Definition

                                    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                    ShortAdditional content defined by implementations
                                    Comments

                                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                    Control0..*
                                    TypeExtension
                                    Is Modifierfalse
                                    Summaryfalse
                                    Alternate Namesextensions, user content
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                    66. Condition.evidence.modifierExtension
                                    Definition

                                    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                    ShortExtensions that cannot be ignored even if unrecognized
                                    Comments

                                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                    Control0..*
                                    TypeExtension
                                    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                    Summarytrue
                                    Requirements

                                    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                    Alternate Namesextensions, user content, modifiers
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                    68. Condition.evidence.code
                                    Definition

                                    A manifestation or symptom that led to the recording of this condition.

                                    ShortManifestation/symptom
                                    Control0..*
                                    This element is affected by the following invariants: con-2
                                    BindingThe codes SHOULD be taken from Clinical Finding .
                                    (preferred to https://healthterminologies.gov.au/fhir/ValueSet/clinical-finding-1)
                                    TypeCodeableConcept
                                    Is Modifierfalse
                                    Summarytrue
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    70. Condition.evidence.detail
                                    Definition

                                    Links to other relevant information, including pathology reports.

                                    ShortSupporting information found elsewhere
                                    Control0..*
                                    This element is affected by the following invariants: con-2
                                    TypeReference(Resource)
                                    Is Modifierfalse
                                    Summarytrue
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    72. Condition.note
                                    Definition

                                    Additional information about the Condition. This is a general notes/comments entry for description of the Condition, its diagnosis and prognosis.

                                    ShortAdditional information about the Condition
                                    Control0..*
                                    TypeAnnotation
                                    Is Modifierfalse
                                    Must Supporttrue
                                    Obligations
                                      ObligationsActor
                                      SHALL:populate-if-knownhttp://hl7.org.au/fhir/core/ActorDefinition/au-core-actor-responder
                                      SHALL:no-errorhttp://hl7.org.au/fhir/core/ActorDefinition/au-core-actor-requester
                                      Summaryfalse
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))